CCNA Bootcamp (Fast Track) - KB0138

COURSE DURATION : 40 HRS

REMOTE LAB ACCESS : 60 HRS

CCNA Exam Review : 18 HRS (optional but reccommended)

CCNA PRACTICE EXAMS: Unlimted HRS (optional but reccommended)

MODULE 1 - KB0112 Cisco 1 and 2 Routers and Routing Technology

COURSE DESCRIPTION :

This module presents you with the concepts and commands you need to configure Cisco routers in multi-protocol internetworks. During the course, you will build a Cisco network from the ground up. This experience, combined with lectures, discussions, exercises and challenging labs, will give you the hands-on experience you need to configure and maintain Cisco routers in the real world.

This training will provide students with the essential knowledge to install, configure, and operate simple routed LANs and WANs.

This course will prepare students pass the CCNA certification.

COURSE OUTCOMES :

Design a simple LAN using Cisco Technology
Design an IP addressing scheme to meet design requirements
Select an appropriate routing protocol based on user requirements
Design a simple internetwork using Cisco technology
Configure routing protocols
Configure IP addresses, subnet masks, and gateway addresses on routers and hosts
Configure a router for additional administrative functionality
Implement a LAN
Manage system image and device configuration files
Perform an initial configuration on a router

COURSE DELIVERY:

Instructor-led, classroom/laboratory-delivery learning model with structured hands-on and minds-on activities and laboratory activities.

ENTRY REQUIREMENTS/PRE-REQUISITES:

Students should have a working knowledge of LAN Local Area Network and have taken the following courses or its equivalent:

CISCO LAB EQUIPMENTS:

CISCO Routers: 2901, 2801 and 1841
CISCO Switches: Catalyst 3550 Layer 3 (Multi-Layer) series, 2900 Series
WIRELESS: AIRONET 1242AG LWAPP

CCNA EXAM ONLINE REVIEW:

Go to Online CCNA review for enrolled students only

TOPICS COVERED

Internetworking Technologies
OSI Reference Model
OSI Overview
Application
Presentation
Session
Transport
Network
Data Link
Physical
Ethernet
Encapsulation
Half and full duplex
Collision detection
LAN Technologies
Ethernet standards
FastEthernet standards
Gigabit standards
Introduction to the Internet Protocol
DOD Stack
Protocols
Ports
Host-to-host layer Protocols
Internet Layer protocols
IP Addressing and Subnetting
IP Addressing
Subnetting masks
Subnetting
Verifying subnetting
Implementing Subnetting
VLSM and Summarization
What is VLSM?
Implementing VLSM
What is Summarization?
Implementing Summarization
Introduction to the Cisco IOS
Operation of Cisco IOS
Startup of a Cisco Router
Software Exec
Router Identification
Setting the Passwords
Setting Banners
Saving Configurations
Router Interfaces
Encrypting passwords
Verifying your Configuration
Managing A Cisco Internetwork
Managing IOS and Configuration Images
Router Boot Sequence
Backing up the Cisco IOS
Restoring the Cisco IOS
Backing up the Cisco Configuration
Restoring the Cisco Configuration
Cisco Discovery Protocol
Creating a host table to resolve names
Using DNS to resolve names
Telnet
Ping
Troubleshooting steps
IP Routing
Basic IP Routing
Static Routing
Default Routing
Dynamic Routing
RIP
RIPv2
Verifying routing
Advanced Routing Protocols
EIGRP
OSPF
Verifying routing
Troubleshooting EIGRP and OSPF
Advanced OSPF configurations

MODULE 2 - KB0134: CISCO 3 & 4 - Switching & WAN Technologies

COURSE DESCRIPTION :

This training covers the essentials of Wide Area Networking. Topics include common Wide Area Networking (WAN) technologies, WAN Frame Relay encapsulation formats WAN link options, WAN design including core, distribution, and access layers, traffic patterns, server placement, and router configuration, PPP, ISDN, and Frame Relay. It covers also the functions and operations of switching technologies

This course will prepare students pass the CCNA certification.

COURSE OUTCOMES :

Describe the functions, operations, and primary components of WAN technologies
Describe the functions and operations of switching technologies
Describe and implement Wide Area Networking (WAN) technologies, WAN Frame Relay encapsulation formats, WAN link options, WAN design including core, distribution, and access layers, traffic patterns, server placement, router configuration, PPP and Frame Relay.

COURSE DELIVERY:

Instructor-led,classroom/laboratory-delivery learning model with structured hands-on and minds-on activities and laboratory activities.

ENTRY REQUIREMENTS:

Students should have a working knowledge of the Windows Operating System & CISCO 1 & 2 - Routers & Routing Technologies

CISCO LAB EQUIPMENTS:

CISCO Routers: 2901, 2801 and 1841
CISCO Switches: Catalyst 3550 Layer 3 (Multi-Layer) series, 2900 Series
WIRELESS: AIRONET 1242AG LWAPP

CCNA EXAM ONLINE REVIEW:

Go to Online CCNA review for enrolled students only

TOPICS COVERED

Switching Technologies
Layer 2 Switching
Address Learning
Forward/Filter Decision
Half and Full Duplex Ethernet
Bridging Compared to LAN Switching
LAN Switch Types
Spanning Tree
Virtual LANs/VTP and STP
VLAN Concepts
ISL and 802.1q
InterVLAN routing
VTP
VLAN configuration
VLAN management and verification
STP and RSTP
Implementing VLANs/VTP and STP
Switching Implementation
Access-Lists
Standard ACL’s
Controlling VTY Access
Wildcards
Extended ACL’s
Named Access-lists
Access-list configuration
Verifying and Monitoring Access lists
Troubleshooting ACL’s
Network Address Translation (NAT)
Introduction to NAT
Static NAT
Dynamic NAT
NAT Overload (PAT)
Configuring NAT and PAT
Verifying NAT and PAT
Implementing NAT
Wireless Technologies
Introduction to Wireless
Wireless standards
Encoding and modulation techniques
Implementing WLAN’s
WLAN security
Hands On Wireless Setup
IPv6
Introduction to IPv6
Why IPv6
IPv6 Addressing
IPv6 routing protocols
Implementing IPv6
Cisco Wide Area Network Support
WAN Overview
WAN Connection Types
WAN Terms
Serial Standards
WAN Protocols
HDLC
PPP
LCP/NCP
PPP Authentication
PAP
CHAP
Configuring PPP
Verifying PPP Configuration
Frame Relay
Frame Relay Terminology
Frame Relay Signaling
Inverse ARP and LMI
Configuring Frame Relay
Static mappings
Verifying Frame Relay
Subinterfaces
Configuring Subinterfaces
Implementing PPP and Frame-relay
WANs Hands On

CCNA Exam Review Details:

Duration: 18 HRS (optional but reccomended)

Schedules are Wednesday to Friday from 9am to 3pm
3 Days duration
Group of 6 to 10 per batch
Bring your Laptop with working LAN adapter or Wifi (If you dont have a laptop its ok PC will be provided for you)
CCNA exam will be Scheduled in our training center after 1 or two weeks of your review or anytime you deemed you are fully prepared to pass the exam.

PRACTICE Exams: Unlimited HRS (optional but reccomended)

Review Materials will be provided for FREE

COURSE FEE :

with FREE Flowing Coffee

COURSE SCHEDULES :

35662

Other Short Courses..

« Prev item - Next Item »
---------------------------------------------

What do you think?

Leave a Question

Inquiries

Page 5 of 8 | << | First | 1 - 2 - 3 - 4 - 5 - 6 - 7 - 8 - | Last | >> |

Panu sir kung may voucher n aq para sa certification exam??magakano naman ang bawas sa course fee??

@ melchor
In line with the course they are both the same, Only the hours make them diff. CCNA BOOTCAMP is a fast track training that takes 40hours in duration while the CISCO 1&2 30 hours duration plus 30 hours for CISCO 3&4.

Hi,

What is the diff between CCNA bootcamp and the CISCO 1&2 and 3&4?

Is this available at Tesda Baguio Branch?

@ ozmozz

Ok Sir.

ok.. thanks.. i hope as soon as possible, we plan to take on this July...

@ ozmozz

Sir we will try to open Sunday schedule.Please wait for the updates of our schedule. Thanks.

Hello CNCTC STAFF, meron po ba tayong Sunday Schedule for this BOOT CAMP? Sunday lang kasi kami available, 2 kami sana mag eenroll and BOOT CAMP sana ang preferred namin. Please tell to us to fix our schedule, and how many hrs. and kung san ang BOOT Camp kung Sunday ang schedule. Thank You & advance..

@ jun

Meron po tayong Saturday schedule sa España Manila. It's open for enrollment. Thanks.

Hi, any Sat/Sun schedule for this course in mid July to August?

Thanks!

@ Noi Yunsay

Yes sir magkakaroon po kami ng schedule for August. Ano preferred nyong schedule weekday or weekend?

do you have schedule in Aug,2011

@ ef

Ok Sir please wait for the updates of our schedules for Saturday and Sunday. Thanks.

Eyeing for Sat/Sunday sched

@ Jun

Yes meron po kaming open schedule for Saturday and Sunday.

ilan po ang percentage ng mga pumasa sa certification na student nyo?

Any schedule for Saturdays or Sundays?

@ vito corleone
Ok we will post every saturday or sunday. Please wait for the update of our schedule. Thank you!

wala po bang schedule for sunday or saturday? sana meron yun lang bakante ko

4 na tayo nakareserve sa 5-23-2011 buendia sana ma2loy na to para wala na hassle

@ Emanuel Mercurio

Yes, we will have schedule for June 6-10. Just keep visiting to our site for the updates of our schedule. The training fee for this course is P15,500 in cash.

I'm planning to enrol in CCNA bootcamp(fast track), do you have any schedule for June 6-10? How much will it cost?

pauwi rin po ako ng pinas sa july, and definitely i will take this course kung meron lang mkakasabay at cguradong matutuloy.

@robert bennett
---Sir, kelan po ba balak nyo sa july, para dalawa na po tayo at isa na lang intay natin.

thanks

@ Robert Bennett

Our tentative schedule for July will be on July 4-8-2011, July 11-15-2011, July 18-22-2011, July 25-29-2011. Minimum of 3 participants to start the training. Thank you.

@ Marc Gumabay

As of now the enrollment is still open for the schedule of May 2-6. Minimum of 3 participants to start the training. Please see this link for reservation:
http://www.cnctc.com.ph/res...

Thank you.

I will be in the Philippines in July. Is there a schedule for July yet? please send all information. Salamat po.

Does the Schedule May 2-6 will push through? if so, i would like to inquire how to register.
kindly reply asap. i need to finalize things before my vacation leave.. thanks

@ kurdt
Ok sir will post schedule for July . Thank you!

sir/madam,
pwede po ba kayo mag post ng schedule for july a month earlier like june? kung ok lng po at possible lang po. para po mas marami ang mkapaghanda at makapagisip... thank you po.

Marc Gumabay,

Ok we will post a schedule for May 16-20.

Sorry, Do you have schedule for May 16-20?

Do you have schedule for May?

Please post schedule for April 25

Schedule for April 25?

@damiro

No scheds for holy week we are closed on holy week

Just want to ask if you have schedules for the holy week this coming April?

@ ryan aquino
Yes, We will post schedule 1st week of may. please wait for the update of the schedule. thank you!

Hey Gency, I am also interested in those dates. Hopefully, they will open a class for it . thanks.

Please post dates for 1st week of May. Thanks.

Do you have CCNA training schedule betwwen May 1 to May 17, 2011. I'm an OFW and here only for a shot vacation.

Thank you.

Hi.. Anyone else planning to take the bootcamp for March 7 til 11? I think Im the only one who reserved for the training for now.. =(

Hello again CNCTC staff:

i would like to confirm of you received my e-mail inquiry regarding the training? Your response is very important for the planning in advance...thank you.

By the way, we plan to have (sana) our training in your Makati branch.

Anyone interested in April classes after Holy Week?

@ Rommel G.

Hi. As of now we don't have yet set of schedules for April but we will have on the 1st week of April.Just keep updating to our site. Thank you.

Hello CNCTC Staff:

Good day.

Just want to ask if you already have schedules for April (1st week)?

thank you very much.

Tuloy na ba yun feb 7-11, makati? if so.. pwede ba mag enroll sa first day mismo?

Hi cnctc staff, I'd like to confirm if the scheduled class will be from 3pm-9pm this feb.7 - 11 schedule @ buendia, makati as opposed to what is stated in your class schedule...my friend called your office and she said that the class will be a 3pm-9pm class will only cover a time frame of 6hrs/day or 30hrs all in all...so in case this is true will there be an extension to the training hours to make the training up to 40 hrs?

Hi, I visited your buendia office this afternoon to supposedly enroll and inquired about the ccna bootcamp for feb 7. But I was advised that the training time was changed from 9am-5pm to 3pm-9pm? so as far as i understand it's only 6hours. The training is 5 days so the total training hours will only be 30 hours contradict to the stated total training hours of 40hours. Please enlighten me about this matter thanks.

I've made the reservation online expecting 9am - 5pm schedule, because I'm working as well and already fixed my work schedule to fit the 9-5pm sched. Since it was changed, I'm now not sure if I can attend on feb 7. I'll try to fix again my work sched and see if I could attend this feb. If not, maybe I'll see you on the next sched. Tnx!

ayon oh tatlo na

wala po ba kayong sat/sun class?

Page 5 of 8 | << | First | 1 - 2 - 3 - 4 - 5 - 6 - 7 - 8 - | Last | >> |

Main Menu

Our Partners

Contest

HANDS-ON Transfer of Technology Training

CCNA Bootcamp (Fast Track) - KB0138

Leave a Question

Inquiries

Technical Information

Job Openings

Scheds Updates