Main Menu

Our Partners


Authorized Pearson Vue Test Center

Schedule your Exam Now!

TESDA Registered
Get Coupon Code

Live Online Training


Live CCNA Remote lab

Contest



  

HANDS-ON Transfer of Technology Training

Cisco 1 and 2 Routers and Routing Technology - KB0112

26


COURSE DURATION : 30 HRS

REMOTE LAB ACCESS : 20 HRS

CCNA Exam Review : 18 HRS (optional but reccommended)

CCNA PRACTICE EXAMS
: Unlimted HRS (optional but reccommended)

COURSE DESCRIPTION :
Average Trainee Evaluation
Evaluations in the last 12 months
10

98%
9

1%
8

1%
7

0%
6
  0%
5
  0%
4
  0%
3
  0%
2
  0%
1
  0%

This module presents you with the concepts and commands you need to configure Cisco routers in multi-protocol internetworks.  During the course, you will build a Cisco network from the ground up. This experience, combined with lectures, discussions, exercises and challenging labs, will give you the hands-on experience you need to configure and maintain Cisco routers in the real world.

This training will provide students with the essential knowledge to install, configure, and operate simple routed LANs and WANs.

This course will prepare students pass the CCNA certification.

COURSE OUTCOMES :

  • Design a simple LAN using Cisco Technology
  • Design an IP addressing scheme to meet design requirements
  • Select an appropriate routing protocol based on user requirements
  • Design a simple internetwork using Cisco technology
  • Configure routing protocols
  • Configure IP addresses, subnet masks, and gateway addresses on routers and hosts
  • Configure a router for additional administrative functionality
  • Implement a LAN
  • Manage system image and device configuration files
  • Perform an initial configuration on a router  

COURSE DELIVERY:

Instructor-led, classroom/laboratory-delivery learning model with structured hands-on and minds-on activities and laboratory activities.

ENTRY REQUIREMENTS/PRE-REQUISITES:

Students should have a working knowledge of LAN Local Area Network and have taken the following courses or its equivalent:


CISCO
LAB EQUIPMENTS:

  • CISCO Routers: 2901, 2801 and 1841
  • CISCO Switches: Catalyst 3550 Layer 3 (Multi-Layer) series, 2900 Series
  • WIRELESS: AIRONET 1242AG LWAPP

CCNA EXAM ONLINE REVIEW:

Go to Online CCNA review for enrolled students only

TOPICS COVERED

  • Internetworking Technologies
  • OSI Reference Model
  • OSI Overview
  • Application
  • Presentation
  • Session
  • Transport
  • Network
  • Data Link
  • Physical
  • Ethernet
  • Encapsulation
  • Half and full duplex
  • Collision detection
  • LAN Technologies
  • Ethernet standards
  • FastEthernet standards
  • Gigabit standards
  • Introduction to the Internet Protocol
  • DOD Stack
  • Protocols
  • Ports
  • Host-to-host layer Protocols
  • Internet Layer protocols
  • IP Addressing and Subnetting
  • IP Addressing
  • Subnetting masks
  • Subnetting
  • Verifying subnetting
  • Implementing Subnetting
  • VLSM and Summarization
  • What is VLSM?
  • Implementing VLSM
  • What is Summarization?
  • Implementing Summarization
  • Introduction to the Cisco IOS
  • Operation of Cisco IOS
  • Startup of a Cisco Router
  • Software Exec
  • Router Identification
  • Setting the Passwords
  • Setting Banners
  • Saving Configurations
  • Router Interfaces
  • Encrypting passwords
  • Verifying your Configuration
  • Managing A Cisco Internetwork
  • Managing IOS and Configuration Images
  • Router Boot Sequence
  • Backing up the Cisco IOS
  • Restoring the Cisco IOS
  • Backing up the Cisco Configuration
  • Restoring the Cisco Configuration
  • Cisco Discovery Protocol
  • Creating a host table to resolve names
  • Using DNS to resolve names
  • Telnet
  • Ping
  • Troubleshooting steps
  • IP Routing
  • Basic IP Routing
  • Static Routing
  • Default Routing
  • Dynamic Routing
  • RIP
  • RIPv2
  • Verifying routing
  • Advanced Routing Protocols
  • EIGRP
  • OSPF
  • Verifying routing
  • Troubleshooting EIGRP and OSPF
  • Advanced OSPF configurations


CCNA Exam Review Details:

Duration: 18 HRS (optional but reccomended)

  1. Schedules are Wednesday to Friday from 9am to 3pm
  2. 3 Days duration
  3. Group of 6 to 10 per batch
  4. Bring your Laptop with working LAN adapter or Wifi (If you dont have a laptop its ok PC will be provided for you)
  5. CCNA exam will be Scheduled in our training center after 1 or two weeks of your review or anytime you deemed you are fully prepared to pass the exam.

PRACTICE Exams: Unlimited HRS (optional but reccomended)

Review Materials will be provided for FREE

COURSE FEE :

with FREE Flowing Coffee
 

COURSE SCHEDULES :


       




66510
Other Short Courses..
« Prev item - Next Item »
---------------------------------------------
What do you think?

Leave a Question






Prove that you are not spambot. Enter the letters & numbers shown in the picture It is Case in-sensitive:


Inquiries

Page 19 of 22 | << | First | ... 11 - 12 - 13 - 14 - 15 - 16 - 17 - 18 - 19 - 20 - 21 - 22 - | Last | >> |


do you have training center in Tacloban


@ eric

Yes pde ka ng magtake ng Cisco course Sir. Thanks.


hi!sir ask ko lang po kung pwede po akong mag take ng cisco 1 &2 cors,ece graduate po ako and i finished tesda cors computer hardware servicing NCII w/ a 100 hrs ojt,pwede po ba akong kumuha cisco 1&2?thanx


was able to see sked oct3 in espana, do you have oct sked in Buendia? since Sept is already over. tnx


hi, tanong ko lng yung sched sa buendia Sat 9-3pm 09-25-2010, tuloy po ba simula ng training bukas? thnks.


@ junifer

Mam just keep visiting to our website for the upcoming schedules by October. Thank you.


when do u have a sked open for oct?say Oct 3?kasi i want sun sked.tnx


@ Caesar Paolo A. Dagaas

Sir wala po kaming branch sa Davao City.


@ liezel

Mam di pa po dumarating Sir James.


Is there any training centers here in davao city who offer the follwing courses of CISCO, LAN AND WAN and others pertaining to computers (PCs and Laptops) and networking? I am a Certified Computer technician (CHS NC II)


@cnctc
kelan po ang next sched ni sir james? preferably weekends


@ Vivien,

Ma'am pasencya na po pero ung nirequest nyong sep 13 to sep 24 na schedule 4 cisco 1 to 4 ay di tuloy di po kc available ung instructor namin. Nagemail na po ako sa inyo before. Thanks.


@ mr.eager to learn

San po ba kayo sana mageenroll Sir sa Espaņa Manila or Buendia Makati? Call us 736 2032 or 889-6042/43 for the confirmation. Thank you.


sir/mam,im eager to learn and enroll at your school.Can you allow me to pay fee dated sept. 11,2010 at sept. 11 class,due to fluctuate uncertain schedules.hoping for your consideration.

sincerely yours.......


@ mark gil gorobat

Sir make a reservation online. Yes you can pay a day before the class. Thank you.


may request for a reservation at espana dated
09-11-2010 class,can i pay a day before the class start?hoping for your response.


@ Mike

yes 1 is to 1 po sa lab


Hi there... currently enrolled ako s cnap, but I'm thinking of opting out bcoz matagal pa bago ko mata2pos ung 4 modules.

ask ko lang, one is to one ba sa inyo during lab exercises?


@cnctc staff

Sir ngreserve nq online Sun 9-3pm in Buendia Mkti branch. pero I was thinking also if I get Sat 9 - 3pm instead depends on my sked im currently working in cc unstable sked ko, kso 4 plng nk reserve sa sat sked bka madissolve din.. thanks po


@ xc

OK sir it won't be a problem 4 us at least u have a basic knowledge in PC LAN/Wan. u can call us at Manila 7362032 or Makati 8896042/43 for more information.thnx


@ rom
ok sir u can take Cisco 1N2 .. ano po pang prefer nlng sched?


@ erwin

ok sir 2 slot reserve for u. pls contact us 4 final confirmation at 7362032. thnx


@cnctc staff: I understand sir. Thanks.

I work as a cc agent for Gateway, eMachines, Acer PC, desktop, etc and we troubleshoot hardware and software, including LAN and Wifi issues on PC/laptop alone and I also work for Dlink and we troubleshoot wired,wireless Router/Switches/modems,Lan,WLAN card via phone as helpdesk but I dont have solid working or hands on exp in network setup and tblshooting. I have minimum hands on training only during product training and during my college days wherein we have setup a LAN computer laboratory. I just wanted to know if these exp will suffice to take the cisco 1-2. Bka kc sa training ma culture shock po aq sa mga ksma ko.. 0.0


Please reserve me...
I'll pay the course fee when the class start..
Cisco 1 and 2..
Espana, Manila...
Sat 3-9pm 09-11-2010 to 10-09-2010
Thanks ...^^


@cnctc staff: sir i have taken a short course in pc troubleshooting with networking sa informatics to compliment my experience in hardware knowledge since pentium 1. and pc lan/wan and networking wont be a problem for me. also i will be studying a 2 year diploma course as network engineer this coming september, and i plan to take up classes in ccna 1 & 2 in december. kung basic knowledge is ok with you guys then it wont be a problem with me.


@ Rom

Sir you should have the basic knowledge in PC NETWORKING or PC LAN/WAN before you have to take the Cisco training. Thank you.


@cnctc staff: Sir I am comsci grad and i have a 2 yrs and 8 mos exp sa gateway, acer brands as tech.supp, but I only have 4-5 months exp sa Dlink support sa call center, will that suffice to qualify cisco 1-2? pls email me. tnx! i am planning to enroll this course sa buendia for sept 13 sched. s mga nk'reserve sa sked nato 2loy po b kau mga sirs? :D


@ xc

Sir may prerequisite course po kami before po kayo makapagtake ng Cisco course. Kelangan may basic knowledge po kayo sa PC Lan/Wan or Networking course.


@ Noel

Sir you can call us 736-2032, 889-6042/43,2395577. Thank you.


good day po, i have no formal education in computers but i have lots of experience with it starting with the pentium 1 and have a certificate in pc troubleshooting. i have plans to study computers this coming 2nd sem and is researching about networking on my own. my question is will it suffice to enroll in ccna 1 &2? because i want to try and get a certificate as a ccent (640-833 exam).


Mam may landline ba kayo may ask lang po ako about sa schedule...


@ vivien

yes madam available yang sched na yan we will be posting that sched later


would like to follow-up if the following schedules are available:

Cisco 1&2 - sep.13-17
Cisco 3&4 - sep.20-24
Time: 9am-3pm
Branch: Espana


ok thanks! sa Espaņa branch po kami mgeenroll.


@kate
ok mam pwede po keong mgenrol on da day.. ask q lng po if san nyo prefered manila or makati?thank u


Hi,

We would like to enroll po on Sept.11 Cisco1-2 Training . 3 po kaming mgppareserve. pwede po bang mgbayad on the scheduled date nlng? thanks!


ok po...sa makati po mam..tnx


@ brent

Sir still open for enrollment as of now wala pa pong stud na nakareserved or enrolled either sa Espaņa or Buendia.


ask ko lang po which sched will most likely meet the minimum number of trainees and start either on 08-21-2010 or 08-22-2010. kahit po sa espana or buendia, so i can join the group. thank you.


Don,

Ok po irereserved po nmn kyo ng 2 slots. Enroll po kyo one day before the training. San po preferred nyo manila or makati?


Hi Sir/ Ma'am

Pwede po magpareserve ng sched ng CISCO 1&2. Start date 9-11-2010,end date 10-9-2010,Sat 9-3pm.

For two persons po.

Kilan po pwede magenroll at mgbayad?

Thanks..


@ brent

Sir still open for enrollment at least minimum of 3 stud to start the training. Thank you.


may nag request po ba ng
Sat 3-9pm 08-21-2010 09-18-2010
na sched. may balak po kasi akong sumabay. thank you.


gusto po pala naming i-move yong preferred sched namin:
Cisco 1&2 - sep.13-17
Cisco 3&4 - sep.20-24
Time: 9am-3pm
Branch: Espana

by 1st week of sep pa lang po kasi kami uuwi.


@ lits

Ang course duration po ng cisco 1 and 2 is 30 hours and for cisco 3 and 4 is 30 hours din. After ng training kung gusto po nyo kumuha ng exam for cisco magtake po kayo ng ccna exam. Thanks.


sir/madam,

sa isang module po ilang hours ang training nyan.. and 1 and 2 module = isa lng po ba ang pagtake ng exam. ant then module 3 4 ganun din po ba?


@ brent

Sir still open for enrollment minimum of 3 participants to start the training. Thanks.


hello.. what's Eric's class/sched?


hello.. what's Eric class sched?


matutuloy po ba yung training this sunday Aug. 15 in makati. mag e-enroll po sana ako this sat.

Page 19 of 22 | << | First | ... 11 - 12 - 13 - 14 - 15 - 16 - 17 - 18 - 19 - 20 - 21 - 22 - | Last | >> |

  
CNCTC Live Chat Inquiry

Job Openings

Scheds Updates

Stay Informed Subscribe

Name *

Email *