CCNA Bootcamp (Fast Track) - KB0138

COURSE DURATION : 40 HRS

REMOTE LAB ACCESS : 60 HRS

CCNA Exam Review : 18 HRS (optional but reccommended)

CCNA PRACTICE EXAMS: Unlimted HRS (optional but reccommended)

MODULE 1 - KB0112 Cisco 1 and 2 Routers and Routing Technology

COURSE DESCRIPTION :

This module presents you with the concepts and commands you need to configure Cisco routers in multi-protocol internetworks. During the course, you will build a Cisco network from the ground up. This experience, combined with lectures, discussions, exercises and challenging labs, will give you the hands-on experience you need to configure and maintain Cisco routers in the real world.

This training will provide students with the essential knowledge to install, configure, and operate simple routed LANs and WANs.

This course will prepare students pass the CCNA certification.

COURSE OUTCOMES :

Design a simple LAN using Cisco Technology
Design an IP addressing scheme to meet design requirements
Select an appropriate routing protocol based on user requirements
Design a simple internetwork using Cisco technology
Configure routing protocols
Configure IP addresses, subnet masks, and gateway addresses on routers and hosts
Configure a router for additional administrative functionality
Implement a LAN
Manage system image and device configuration files
Perform an initial configuration on a router

COURSE DELIVERY:

Instructor-led, classroom/laboratory-delivery learning model with structured hands-on and minds-on activities and laboratory activities.

ENTRY REQUIREMENTS/PRE-REQUISITES:

Students should have a working knowledge of LAN Local Area Network and have taken the following courses or its equivalent:

CISCO LAB EQUIPMENTS:

CISCO Routers: 2901, 2801 and 1841
CISCO Switches: Catalyst 3550 Layer 3 (Multi-Layer) series, 2900 Series
WIRELESS: AIRONET 1242AG LWAPP

CCNA EXAM ONLINE REVIEW:

Go to Online CCNA review for enrolled students only

TOPICS COVERED

Internetworking Technologies
OSI Reference Model
OSI Overview
Application
Presentation
Session
Transport
Network
Data Link
Physical
Ethernet
Encapsulation
Half and full duplex
Collision detection
LAN Technologies
Ethernet standards
FastEthernet standards
Gigabit standards
Introduction to the Internet Protocol
DOD Stack
Protocols
Ports
Host-to-host layer Protocols
Internet Layer protocols
IP Addressing and Subnetting
IP Addressing
Subnetting masks
Subnetting
Verifying subnetting
Implementing Subnetting
VLSM and Summarization
What is VLSM?
Implementing VLSM
What is Summarization?
Implementing Summarization
Introduction to the Cisco IOS
Operation of Cisco IOS
Startup of a Cisco Router
Software Exec
Router Identification
Setting the Passwords
Setting Banners
Saving Configurations
Router Interfaces
Encrypting passwords
Verifying your Configuration
Managing A Cisco Internetwork
Managing IOS and Configuration Images
Router Boot Sequence
Backing up the Cisco IOS
Restoring the Cisco IOS
Backing up the Cisco Configuration
Restoring the Cisco Configuration
Cisco Discovery Protocol
Creating a host table to resolve names
Using DNS to resolve names
Telnet
Ping
Troubleshooting steps
IP Routing
Basic IP Routing
Static Routing
Default Routing
Dynamic Routing
RIP
RIPv2
Verifying routing
Advanced Routing Protocols
EIGRP
OSPF
Verifying routing
Troubleshooting EIGRP and OSPF
Advanced OSPF configurations

MODULE 2 - KB0134: CISCO 3 & 4 - Switching & WAN Technologies

COURSE DESCRIPTION :

This training covers the essentials of Wide Area Networking. Topics include common Wide Area Networking (WAN) technologies, WAN Frame Relay encapsulation formats WAN link options, WAN design including core, distribution, and access layers, traffic patterns, server placement, and router configuration, PPP, ISDN, and Frame Relay. It covers also the functions and operations of switching technologies

This course will prepare students pass the CCNA certification.

COURSE OUTCOMES :

Describe the functions, operations, and primary components of WAN technologies
Describe the functions and operations of switching technologies
Describe and implement Wide Area Networking (WAN) technologies, WAN Frame Relay encapsulation formats, WAN link options, WAN design including core, distribution, and access layers, traffic patterns, server placement, router configuration, PPP and Frame Relay.

COURSE DELIVERY:

Instructor-led,classroom/laboratory-delivery learning model with structured hands-on and minds-on activities and laboratory activities.

ENTRY REQUIREMENTS:

Students should have a working knowledge of the Windows Operating System & CISCO 1 & 2 - Routers & Routing Technologies

CISCO LAB EQUIPMENTS:

CISCO Routers: 2901, 2801 and 1841
CISCO Switches: Catalyst 3550 Layer 3 (Multi-Layer) series, 2900 Series
WIRELESS: AIRONET 1242AG LWAPP

CCNA EXAM ONLINE REVIEW:

Go to Online CCNA review for enrolled students only

TOPICS COVERED

Switching Technologies
Layer 2 Switching
Address Learning
Forward/Filter Decision
Half and Full Duplex Ethernet
Bridging Compared to LAN Switching
LAN Switch Types
Spanning Tree
Virtual LANs/VTP and STP
VLAN Concepts
ISL and 802.1q
InterVLAN routing
VTP
VLAN configuration
VLAN management and verification
STP and RSTP
Implementing VLANs/VTP and STP
Switching Implementation
Access-Lists
Standard ACL’s
Controlling VTY Access
Wildcards
Extended ACL’s
Named Access-lists
Access-list configuration
Verifying and Monitoring Access lists
Troubleshooting ACL’s
Network Address Translation (NAT)
Introduction to NAT
Static NAT
Dynamic NAT
NAT Overload (PAT)
Configuring NAT and PAT
Verifying NAT and PAT
Implementing NAT
Wireless Technologies
Introduction to Wireless
Wireless standards
Encoding and modulation techniques
Implementing WLAN’s
WLAN security
Hands On Wireless Setup
IPv6
Introduction to IPv6
Why IPv6
IPv6 Addressing
IPv6 routing protocols
Implementing IPv6
Cisco Wide Area Network Support
WAN Overview
WAN Connection Types
WAN Terms
Serial Standards
WAN Protocols
HDLC
PPP
LCP/NCP
PPP Authentication
PAP
CHAP
Configuring PPP
Verifying PPP Configuration
Frame Relay
Frame Relay Terminology
Frame Relay Signaling
Inverse ARP and LMI
Configuring Frame Relay
Static mappings
Verifying Frame Relay
Subinterfaces
Configuring Subinterfaces
Implementing PPP and Frame-relay
WANs Hands On

CCNA Exam Review Details:

Duration: 18 HRS (optional but reccomended)

Schedules are Wednesday to Friday from 9am to 3pm
3 Days duration
Group of 6 to 10 per batch
Bring your Laptop with working LAN adapter or Wifi (If you dont have a laptop its ok PC will be provided for you)
CCNA exam will be Scheduled in our training center after 1 or two weeks of your review or anytime you deemed you are fully prepared to pass the exam.

PRACTICE Exams: Unlimited HRS (optional but reccomended)

Review Materials will be provided for FREE

COURSE FEE :

with FREE Flowing Coffee

COURSE SCHEDULES :

36946

Other Short Courses..

« Prev item - Next Item »
---------------------------------------------

What do you think?

Leave a Question

Inquiries

Page 1 of 9 | << | First | 1 - 2 - 3 - 4 - 5 - 6 - 7 - 8 - 9 - | Last | >> |

@ arnnie,

Meron kaming schedule on June 22 to August 03, 2013 every Saturday 3 to 9pm. 7362032 / 7365196 espana, manila and 8896042 to 43 for buendia, makati.

Hi, Anu po updated scheule ng CCNA boothcamp for sat. sched? Anu po landline nyo? wla ksi sumasagot dun sa mga contact number nyo na nka advertise sa web. tnx

Regardless of how good a lawn looks like, lack of proper drainage system causes the trees to suffer and the soil to saturate during the rainy season. <a href="http://red-bottom-shoes-201..." title="Red Bottom Shoes Sale">Red Bottom Shoes Sale</a>

I precisely wanted to thank you very much once again. I'm not certain what I could possibly have gone through in the absence of the aspects contributed by you on such subject matter. Entirely was a terrifying concern for me personally, however , being able to view the skilled fashion you solved the issue took me to leap for gladness. I will be happy for this support as well as believe you find out what a powerful job you are always accomplishing instructing some other people using your webblog. I am sure you haven't met all of us. Benjamin http://www.blurty.com/useri...

@ Arnie

Yes, 99% po ang pumapasa sa exam for CCNA. Thanks

hi,

Lahat po ba ng ngtatake ng cisco training sa CNCTC pumapasa sa CCNA exam? Thanks.

AJ

@ seph

Ang schedule po namin ay sa June 1, 2013 for every saturday and June 2, 2013 for ever Sunday. Thanks

Hi,
ask ko po kung kailan mag start ang training para sa june.? ung session ng class ay pra sa saturday or sunday.???

Hi Sir/Madam,

Is CNCTC a certified Training Partner of Cisco?

@ Seph

Yes meron po kayong certificate na makukuha after the training.

may certificate ba kami makukuha after ng bootcamp.??

@ Daniel

Yes, we will be having a schedule for the month of June and July. we have weekdays schedule and weekends. please keep posted. Thank you

Do you have a schedule for June/July yet?

@ jayjay

Yes the exam is for CCNA Certification. Thanks.

Hi,

Regarding po sa course fee with exam, yung exam po ba yun na yung Certification exam for CCNA?

@ Rhoel Lambino

Okay, yung course fee po yun lang yung babayaran niyo kung training lang ang kukunin niyo. pero yung course fee with exam included na po dun yung payment for CCNA exam at yung training fee. Thank You

Hi.whats the difference between normal course & course with exam?im confused.Thanks.

@ Brian

Okay, you can take this course as long as you have a background for the course pre-requisite. Thanks

Hi,
if we are already a licensed electronics engineer, are we still need to take the prerequisites? thanks

@ Kristine

Yes, but if you have a knowledge regarding the course pre-requisites you can enroll this course without taking the pre-requisites. Thank You

I'm a licensed Electronics Engineer, do i need to enroll first on the pre-requisites program to enroll in this course

@ Rae Justine Chan

Hi. Rae Justin. 99.9 % is the passing rate. Thanks.

Hello cnctc, may I please know what your passing rate is?

@ Jigs

Yes pwede po kayong mag sit in sa Cisco 1 to 4 class. Just give us a call. Thanks.

Hi CNCTC,

I enrolled for CCNA1-4 last May 2012 and I am planning to review again, ok lng ba na seat in for those modules for my review. Thanks

@ Val

Magkakaroon po ng schedule for the month of May. Please keep posted. Thank you.

Wala pa po ba sched sa May?

@ Shi-Shiw

Kung may knowledge na po kayo dun sa prerequisite hindi na po kailangan pang kunin pwde na po kyong dumiretso sa course na to.

Sir/Mam ask ko lang po kung kailangan kupapubang kumuha ng course pre-requisites if graduate nako ng BSIT????

@ Mackoy

Yes, pwede po kayo magtake ng exam after ng training niyo. punta lang po kayo sa main office namin sa España Manila para magpaschedule ng exam. Thank You

sir pwede po ba mag take ng exam ng saturday or sunday right after ng 5 day CCNA fast track bootcamp

@ sheylosa

Hello. Yes, we will have schedule for April 15-19. Our office is located at Rm. 208 2nd floor UPY Bldg. Sen. Gil Puyat Ave. Cr. Marconi St. Palanan, Makati City. Thanks.

saan ung exact location ng buendia branch niyo?

hi do you have schedules for april 15-19?

@ Mark Sanchez

Kung hindi po natin ma meet yung minimum of three participants mamove po ito ng April 8 to April 12, 2013. Thank You

Thank you for your reply.

Is there any chance that schedule could be moved? Can i schedule my exam on saturday right after the training?

@ Mark Sanchez

Yes, we will be having a schedule on April 01 to April 05, 2013. open for enrollment. please wait for the update. Thank you

Do you have April 1-5 Schedule?

@ shamie

Your welcome! Thank You

thank you.

@ shamie

Yes, reschedule po. our next schedule is on March 2 to April 13, 2013. please keep posted for the update. Thank You

is this schedule can be moved?

Sat 3-9pm 02-23-2013 04-13-2013 open -- 2

Or do you have any other start date this march for buendia branch.

Thank you

@ Shamie

Yes, yung training fee with exam is 31,500 and yan din po ang covered ne exam niyo yung module 1-4. Thank you

Sorry po mejo naguluhan po ako. so ung 31,500 for Modules 1-4 and exam? ung exam po ba is also for all those modules po? thanks

@ izza

Give us a call @ (632) 736-2032, 736-5196 in España Manila and (632) 889-6042/43 and 239-5577. Thank you.

may i know your contact or school number po thanks. so interested

@ shamie

Yes, yun na po yung payment for CCNA Exam. Thank You

ask ko lng po.. ung Course fee with Exam P31,500. ano pong exam ksma nun? for CCNA 1&2, 3&4 n po ba un? thanks.

nakatake na kasi ako nung module yung 1 to 4 pero gusto ko sana mareview overall yung bootcamp ganun yung gagawin?

Page 1 of 9 | << | First | 1 - 2 - 3 - 4 - 5 - 6 - 7 - 8 - 9 - | Last | >> |

Main Menu

Our Partners

Contest

HANDS-ON Transfer of Technology Training

CCNA Bootcamp (Fast Track) - KB0138

Leave a Question

Inquiries

Technical Information

Job Openings

Scheds Updates