Authorized Pearson Vue Test Center


Author Login



CNCTC - Excellence in IT TRAINING

Archive for June 2009

How to Troubleshoot a Dead Motherboard/Computer

By: Joseph Alderete Posted: 01 Jun, 2009
This is one of the best practice to troubleshoot SYSTEM BOARD

1.Reset the bios
2.Check the power supply
3. Make sure you didnt over tighten the screws.
4. Make sure that the mb standoffs are only in the places where there are holes. if not it can short the Motherboard.
5. Check for loose screws
6. Verify in the manual that the Power Switch is on the correct pins
7. Verify that the switch works. You can do that by finding the pins where the power switch... continue |