Main Menu

Our Partners


Authorized Pearson Vue Test Center

Schedule your Exam Now!

TESDA Registered
Get Coupon Code

Live Online Training


Live CCNA Remote lab

Contest



  

HANDS-ON Transfer of Technology Training

LAPTOP Servicing, Assembly, Hardware Troubleshooting and Repair - KB0102

26


COURSE DURATION : 24 Hrs

COURSE DESCRIPTION :

This training presents you with intensive laptop training. It gives you all you need to know to be an expert laptop technician. It Starts from intermediate to advanced level of laptop servicing. During the training, you will assemble, disassemble, upgrade and repair a complete laptop computer and many more. This course  will give you the hands-on experience you need to repair and maintain a laptop

COURSE OUTCOMES : 

After the training students will become expert in Servicing laptop computers.

COURSE DELIVERY:

  • Instructor-led, classroom/laboratory-delivery learning model with structured hands-on and minds-on activities and laboratory activities.

ENTRY REQUIREMENTS:

Students who intend to get this training should have experience in the following:

  • Have taken the PC ASSEMBLY, HARDWARE & SOFTWARE TROUBLESHOOTING/REPAIR & DATA RECOVERY With OJT course.

TOPICS COVERED

  • Introduction to laptop industry
  • Pricing of brand new and used laptop
  • Familiarization of different models of laptop
  • Basic Laptop handling and care
  • Mastering the different gadgets integrated with the laptop
  • Familiarization of the tools for repairing laptop
  • Hardware component familiarization and identification of each models and generations of a laptop.
  • Component identification
  • Installing and upgrading hard disk... drives
  • Installing and upgrading memory modules
  • Disassembly and reassembly of laptops
  • PCMCIA device configuration
  • Keyboard service
  • Hard disk management
  • IDE to mini IDE interface
  • Wireless networking
  • Data recovery and password recovery procedures
  • LCD panel disassembly and servicing of LCD panels
  • Wireless network management of laptops
  • Downloading links to popular laptop models
  • Tips and tricks our Trainers acquired from years of experiences.

Note: You can bring your DEFECTIVE laptop. We will teach you how to replace and repair any hardware inside.  

COURSE FEE :

with FREE Flowing Coffee

 Cash Installment  Downpayment  Due Date  Manual 
         

COURSE SCHEDULES : 


       


« Prev item - Next Item »
---------------------------------------------
What do you think?

Leave a Question

Inquiries


Is there any home study course for any of this courses for those who cannot attend actual days of training due to work.


hello Aniceto,

Unfortunately our online training for this course is not yet available.


hi,

i took a pc troubleshooting course from informatics. do i still need to take your own pc troubleshooting course before i can take the laptop repair and troubleshooting course?

another, can i enroll this via TESDA?

Thank you very much.


why is it a requirement to take the PC hardware repair when it is my personal requirement also is the laptop course that you
are offering. need some clarification... thnx.


hello wads,

This prerequisites such as PC Repair for this course will help you understand and learn the technical know how in repairing a laptop so that you will not be having a hard time coping up with the rigorous training for laptop because this course starts with intermediate to advance level, the basics are not discussed in this course.


sori its only now. i lost my broadband. thank you 4 ur rply very well said. all i want is to learn laptop servicing actually i'm into cellphon repair and i do have a desktop which i do all the basic repairing. now i got a laptop which i also use for cellphon repair and application thats why i want to learn its repair. is it not possible to enroll directly. thank you 4 ur time. thank you very much.


hello wads,
.
based on your technical background. You can go directly for this course just give us a call to learn more details

thanking you


Nil,

Pwde po kyo magenroll pero ang venue ng training is dito sa philippines. For more info you can call us at tel. nos. 7362032/7365196 or email us at cnctcinc[at]yahoo[dot]com. Thanks.


I WANT TO ENROLL IN THIS COURES PWD PO BA AKO , I'M HERE IN HONGKONG OFW AKO . HALOS LAHAT NG GAMIT DITO AY LAPTOP . HOPE U CAN HELP ME . . . SALAMAT PO. . .


Hi,
I am interested in Laptop Servicing Course but your prerequisite for this course is PC assembly course. While in Dubai i have taken and finished a 3 month (every Friday only)PC Assembly course under FACE (Filipino Asso. for Computer Excellence). Would this be enough for me to take Laptop Servicing Course. I can even show you my certificate.


@ Roger

Yes sir you can take the laptop training anytime


aside to manila and makati, do u have other venue of training, specially here in laguna? tnx!


@ gio,

unfortunately, we dont have branch in laguna.


kelan star ang class


kelan start ng class dto sa laptop servicing pwede na ba mag start mag enrol na sana ako


Where is the training venue here in the Philippines? If I will enroll, when I will start the training?


@ Florentino

We have España Manila and Buendia Makati branch. Minimum of 3 students to start the training.


Good evening, is there any chances to have a training this coming weekdays at morning session, thanks


what po ibig sabihin fast/slow track


@ max ballena

We have weekdays sched monday to friday @ 6pm to 9pm.


@ edgar

When we say fast track mas lower ang course duration compare to slow track.


Where is the training venue??


@ ron

Where located at España Manila and Buendia Makati.


ituturo din po ba dito un pag repair ng laptop at lcd monitor by using heating and soldering equipment? pati pag operate ng BGA equipment?


Hello, gusto ko po sana mag aral ng laptop servicing pwede po bang babaan ang downpayment?


gppm po i want to know laptop troubleshooting pero my work po me 7 to 5pm anu po gagawin ko. to enroll that course.


erwin24

Opo ituturo ung pagrepair ng buong laptop.


wala po ang ganitong course dito sa ilocos province loaog? mas malapit po sana.


WALA PO BANG COURSE NA GANYAN DITO SA TESDA LAOAG? ILOCOS NORTE


@ skan

Wala po kaming branch sa Ilocos Norte.


do you have a branch in Quezon city?
NcR554


Ali

No sir only @ España Manila and Buendia, Makati.


hi,good pm..
may i ask if it is possible na makapagenroll ako in this particular course. i took pc hardware back then pero hindi pa software troubleshooting. I'm currently working as a tech support kaya sa tingin ko naman alam ko na din ilang info concerning software issues so i think i can manage. i'l wait for your reply. thank you^^


@ joed

Hello good pm too sir yes pde na po kayong magenroll in this course. Thanks.


mam meron po ba kaung sked sa sept. kc may work po ako at sa nxt month sat. day-off ko.


@ Lhui

Yes meron po kaming sched ng September.


ask ko lng po kung pwd mag-enroll kahit wala sa entry requiremennts ninyo but I have knowledge in PC troubleshooting.


@ Lhui

Yes pde po kayong magenroll in this course.


sir may work po kc me till 5:30 pm. byahe me s may cnctc makati cguro mga 6:30pm na ako makadating. ok lang po ba na ma late me nang mga 30 minutes or 1 hour? kasi isip ko byahe ko papunta. or may klass po kau n mag star anf 7pm po? tnx jome po ito.


ask lang po ako kon meron din dito sa ilo-ilo every weak end lang! at saan pwd na malapit dito! iwork as a computer thec! so gusto ko matoto mag ayos ng loptop


@ biboy

Sir wala po kaming branch sa Iloilo City.


.... 4 na kami... bat nde na naman ma22loy... huhuhu... sabi ng nakasagot sa telepono.. kahit dun na kami magbayad sa araw ng umpisa ng training.. tapos nag call wla daw nag enrol.. expect kasi namin dun na magbabayad..sa umpisa ng araw ng training...
pag nagka taon baka bongalink na lang ako.. lagi postpone sched nio.. mga pips.. 4 na kami reserved nde pa rin 2loy... wla naman kau cnabi na magbayad days b4 training..huhu


@ boljak

Sir sinabi ko naman po kanina sa inyo sa phone na kayo pa lang po ang nagconfirm hinihintay pa po namin other confirmation ng nakareserved. Thanks.


ituturo din po ba dito un pag repair ng vga chips,power/adopter/jack and lcd monitor by using heating and soldering equipment? or baka kagaya nyo yong BONGALINK.NET na mga loma yong mga laptop eh paano tayo matoto if mga loma na? pera lang or gimik lang para kumita sana d ganon kc sayang yong time at pera namin.


my basic electronics badito sa itotoro nyo?
one on one ba ang laptop at my time pg desassembly/reassembly? sana my soldering at reading multimeter.sana maganda ang training para nmn proud kami sa school kami galing..salamat


laptop/notebook computer mafamiliar banatin lahat ng hardware parts? dapat iba-iba yong model ng laptop para naman sulit d mg sisi yong mga studyanti kagaya ko.


Hello to all of you,

Mga bago po mga laptop ang ginagamit namen me mga warranty pa ang dinidisassemble mga. Pentium 4 ang ginagawa munang pang practice para sa mga bagong laptop na babanatin

using heating and soldering equipment ang ginagamit pang repair ng laptop po mga sir.


quistion po. kong my heater at soldering sa board chips level eh bakit wla sa outline nyo? baka kc sayang time nmn jn. kc mga computer technician tesda certified din kami. eh kong basic lng i totoro nyo buti manuod nlng ng youtube kc marami mga laptop disassebly din itotoro.


oo nga poh. dko naisip yan. sino bang instructor ng laptop? my experience bayan?
alah eh dapat mg turo dapt magaling ang instrutor para yong nag aral CNCTC proud sa school nyo.
GUSTONG ko tlga mg aral ng laptop technician kc demand din to sa abroad al local.
paki linaw ngang isyu nato..


hallo poh! hindba pwd dalawa lang kami mg training, instead na tatlo?. ilang unit ba ang sa isang studyanti ang ina assembly/reassembly at ano poh bang mga model? pwd po ba malaman? nka reserved po kami.salamat at God bless.


@ shim2x

Cge po iuupdate po namin course outline namin. Thanks.


it is good to have this kind of trainings for upgrading personal skill, and also this is accreditted by TESDA how nice!!!!!!!!, hoping that u will have branch near Q.C layo po kase, thanks....


My quistion is have heater at soldering to board chips repair!!!??? thank you and more power to all...................


hi ! am Michael 32/m from mindanao tanong kolang po ha my basic napo ko natutonan sa schematic diagram,laptop dis-assembly/reassembly and familiarizing pro dko pa po alam kong papano mg tangal ng mga chips sa board. even using component heater and soldering. gusto ko mg aral kong my ron. my discount ba kong galing ka ng mindanao?reply po plz ito number ko 09052210370


@ Neil

Sir mas malapit po kayo s España Manila kung manggagaling po kayo sa Quezon City. Thanks.


Hi ano na poh wla bang ganon yong board chips repair??? xenxa kyo sa kkolitan ko...thanks and God-bless all.


@ Michael

Sir meron pong board chips repair board level po ang tinuturo na may soldering. Thank you.


@ SSTpoy

Yes meron pong heater and soldering sa board chips repair. Thank you.


wlpa bang final na schedule para mg start nayong training or dba pwd dalawa instead tatlo? baka wlang mga pera mgayan pa reserve lng cla if interested nmn db dapat mg enroll na? ask kolang poh if galing ka ng san andres bukid, manila lapit lang ba buendia makati?


@ michael

Sir nagaantay pa po kami ng isang stud na magcoconfirm 3 participants po kasi tlga ang kelangan before magstart nag training. Yes malapit lang po ang San Andres bukid dito sa Buendia. Thanks.


24 hr course will be devided into 3 hour per day so that will be 8 days. right


@ Marion

Yes 8 days po un pag 3 hours a day.


how many session?


@ rhys reyes

4 consecutive meetings for 6 hours a day and 8 meetings for 3 hours a day to complete the 24 hours. Thank you.


Ok lang po ba kung ndi ako umattend ng PC ASSEMBLY, HARDWARE & SOFTWARE TROUBLESHOOTING/REPAIR & DATA RECOVERY With OJT course? medyo may knowleedge na rin nman ako with PC since I'm a programmer, gusto ko lang ng laptop troubleshooting. thanks.


@ jen sabado

Yes pde na po kayong dumiretso sa Laptop Troubleshooting.


pwede po ba kung kahit wla ng OJT sa PC assemble at kung anu pa man, kasi my alam na rin ako sa pagassemble ng pc at repair kaso self study, freelance technician for PC sa laptop sna gusto ko matuto magayos pwede po ba?


@ Arnel Resolado

Yes pde kahit hindi na kunin ang OJT is just an optional.


Saan po batayo pwd mg down payment? mismo dyan tayo pumonta sa office? balak ko kc mg training. kaso d2 pa po ako sa cagayan de oro and every friday yong larga ng barko.. my discount ba tayo mga sir/madam?? my classmate ako dyan sa manila. nasa san address bukid, manila dba lapit lang yon sa makati? or my account ba para mka deposit para pg dating ko ngayong monday start napo ng training. epapakita ko po yong Ticket ma bili ko round trip. para makita nyo na pumta lang ako dyan para mg school..sana po bigyan nyo ako ng discount.. P1,600 kc pamasi ng barko P3,200 lahat kain ko at pamasa ko pa. reply po kayo if ok lang..


@ arpe

Sir pde po kayong magbayad ng tuition fee dito mismo sa aming opisina. Kelangan po ng at least 3 participants para magstart ang proposal schedule na nakapost sa website. Kung nais po nyong makakakuha ng training fee discount kuha po kayo ng coupon code its available everyday at 9am. Thank you.


Sir ala po ba kayo malapit dito sa Rizal? thanks


@ noel simeon

Sir wala po kaming branch sa Rizal. We'r located at España Manila and Buendia Makati lang po. Thanks.


wala po ba kayo branch dito sa cavite


@ salvador

wala sir.. only sampaloc manila and buendia makati..tnx


gud morning panu poh ba enroll d2? nu mga requirements nyo sir? my sunday class ba kau sir?


@ jason

good am too sir. pde po kayong magenroll online or in person punta po kayo sa aming opisina na malapit sa inyo either sa Manila or Makati office.For Sunday class kust keep visiting our site sa upcoming schedule. Thank you.


gud pm. tanong ko lang po kung paano po kung wala akong defective laptop.. may iba po bang laptop na maaring gamitin for learning?


@ Vhinz

Ok lng pag wala kang defective laptop optional lng yan me mga laptops na ginagamit sa training


Sir...Tuloy Ba Yung Training Nyo sa Linggo??


sir/madam, Ask ko lang po kung tuloy ba yung laptop servicing nyo sa sunday.balak ko mag enroll at ano ba the best way papunta sa buendia Galing dito sa Angono Rizal


hi I have a small training org. ,so how can I teach to my student in short course.


I am an Bsece graduate can i take this eventhough i did not took PC Hardware and Software Troubleshooting and Repair w/ OJT - KB0101


wala naba kayong sched ng laptop servicing this jan 15 onwards?


@ emman

Yes Sir you can enroll this course even without taking the PC Hardware and Software Troubleshooting and Repair w/ OJT.


Will you have a Schedule for this course on jan 24 to 29 at evening?


how much the payment for that training kung IT ang mapili ko per day ba ang babayaran or per subject?


@ black2heaven

Sir kung night class po ang kukunin nyo ang magiging schedule is Jan. 24 to Feb. 2 at 6pm-9pm to complete the 24 hours of course duration. MInimum of 3 participants to start the training. Thank you!


@ marcial comedia

Sir the tuition for this course is P5,500 in cash for 24 hours course duration.


Hello Sir,

Panu sir kung hindi ako kumuha ng PC ASSEMBLY, HARDWARE & SOFTWARE TROUBLESHOOTING/REPAIR & DATA RECOVERY With OJT course. tpos my back ground na ako about repairing computer... I just want to know about laptop... please advice


may alam na po ako sa laoptop magkano po kung board level trooble shooting lang po ng laoptop ang kukunin ko


Hi Nol

Yes you can enroll the laptop servicing without enrolling the desktop servicing.


Hi Mike

Our training is package as one course.you cannot take one module only.


tanung ko lang po, posible po bang gmawa kyo schedule na ma-accumulate yung 24 hours training within one week only? para lang sa mga hindi kakayanin ng ilang lingo. At pati na rin sa ibang course gaya ng networking.

thnak you,
jun


@ Jun

Sir, as of now wala pa tayong available schedule for 24 hours a week loptop training, kasi po depende sa availability ng trainor. For Pc Lan/wan networking cpurse meron kameng moday-friday schedule 5 days from 9am-3pm.Thank you


wala bang feb na course for lapto servicing, every sat lang?


baka pwd po kau mag sked ng sunday class sa laptop servesing & trouble shoting sa espania kc yn lang po ang free ko kc po kng sa makati pa eh malayo na po skin, pls reply me


@ Mikel

Sir Feb 5-26/9-3pm our next schedule.At least 3 students is enrolled to start the training.Thanks


@ Eduard Calimlim

Sir cge po magopen kami ng sched s espana ng sunday schedule.Thanks


gudam, ask ko lang kung pwede pa po ba ko magpa reserve ngayon para sa schedule ng saturday? ngayon lang kz ko ng ka budjet. thanks.


@ ryan021

Yes pde po kayong magpareserved. Please see this link for reservation: http://cnctc.com.ph/reserva...

Thank you.


hi, i wud like to take the loptop servicing course. Ask ko lang kung after ba ng training makakaresiv ba ako ng tesda certification? Requirement na kasi sa DTI ngayon ang tesda certificate kung magtatayo ka ng repair shop.


tanong ko narin kung tuloy ba ang training sa makati on loptop servicing start feb14-23? Kung tuloy pupunta ako dyan ng satrdy or sunday para magbayad na.


what happen to the m-f 6-9pm sked in makati?


@ michael

Hello Michael. You will receive certificate of completion after you finish the course. To get Tesda Certificate you have to take the PC Troubleshooting and PC Networking then take the assessment exam. The enrollment is still open. Minimum of 3 participants to start the training.


i can try to enroll of this course but ,can i ask you something like this,the student he or she is lock of knowledge about the basic of computer they are allowed to enrolled?to learned more about.


Wala na bang training sked sa Makati na M-F 6-9pm? mag eenrol na sana ako.


wala po bang schedule sa buendia ng M - F?


wala po bang schedule sa buendia ng M - F?

mag eenrol na sana ako.


@ dennis samson
Mag-oopen po kame ng Monday-Friday class. Just wait for the update of our schedule. thank you!


pd po ba icropped into 2 days ang session kht double pa ang bayad. i'm interested bt no time kz. tanx.


what i mean po 2 days straight, one on one basis.


Hi. Sa laptop servicing course ba matatackle din and pag format ng OS using usb etc? medyo nalilito lang kasi ako. thanks!


@ Emz

We will contact the instructor in regards to his schedule so that we can fit your preferred schedule. Can you email us your contact details so that we can inform you in regards to this matter @ cnctcinc[at]yahoo[dot]com

In regards to one on one training. The training fee is P16,500.00


@ Eux

Yes sir ituturo po ng Trainor.You can ask him personally too.


Re:LAPTOP Servicing, Assembly, Hardware Troubleshooting and Repair - KB0102?
After i take this course will i be able to repair no power problem of a laptop,no display?chipset problem?


@ Harry P. Holgado

Yes sir, You can can repair laptop errors or problems.


ituturo ba sa course na to kung paano irepair ang isang laptop na no power?no display maski working ang memory?


@ harry holgado
Yes po ituturo.You are open to ask question to our instructor.


good day i am willing to train loptop sevicing
ask ko lang kung may kasamang basic electronic ang course like repair ng adaptor, pggamit ng tester, kung may mga wire na defective etc


@emanuel alarilla

yes meron po me basic electronics na kasama


very interesting and i want to upgrade my skill


Meron po ba malapit sa quezon city or caloocan for laptop repair?

What if mag enroll po ako for loptop tech.
pwede na po ba yung certificate ko galing sa ibang computer school. May 2 years of experience na po ako sa pagre-repair ng desktop. Pero may konting knowledge ako about laptop. Nakpag ojt na po ako. Kaso lang di ko po nakuha yung certificate ko.

Sapat na po bang requirements yun?


course for laptop tech? is it advantage if you have knowledge for computer repair to take this course?


Bat parang walang sumasagot sa mga tanong namin? Kala ko ipapadala sa e-mail mko ang sagot. wala naman pala.


@jhonzen

Wala po kaming branch sa qc and caloocan pero kung sa qc ka malapit ka na sa Espana Mla branch namen based sa experiences nyo pde na kayong maglaptop training


@Denz

Yes kelangan pong me knowledge na kayo about compter repair


Paki post naman po yung contact numbver sa espania. For laptop. Thnks.


good day..wala pa po ba kaung ibang sked ng laptop repair nyo?


@ Jhonzen

Contact Number for Espana: 7362032 and 736-5196


@ Rupert

Monday to Friday 6-9pm sir ung ibang sched namin.

Thanks


@cnctc staff

mam san po ang venue at kailan po ito start?..thanks


@ rupert
We are located at Rm 210 Dona Amparo Bldg., Espana Blvd. corner G. Tolentino St. Sampaloc Manila and Rm 208 UPY Bldg., Gil Puyat Ave. corner Marconi St.
Our tentative schedule is May 2 to May 13, minimum of 3 participants to start the training. thank you!


send me infos. tnx


mron bang wed schedule? wed kc ung free day ko sa work as a technician. gusto ko sana mgtraaining ng laptop sa school nyo? tsaka 5500 ba lahat ng bayaran overall fee?


@ Arven Alarca
Wala po kameng every Wednesday schedule.Course fee is 5500 and 100 for manual.Thanks!


my mga requirements pa po bang kailangan para mkatake ng training..?
& over all fee 5,500 ala na po bang ibang babayaran..?


@ juneil periña
Wala na pong ibang requirements unless students must have knowledge for PC troubleshooting Repair. for the training fee 5500 plus 100 for the manual.


@cnctc staff
sir/madam

wala po bang/ 6-9 sched sa espana branch nyo


@ rupert

Cge Sir magpopost po kami ng M to F 6-9pm sa España Manila. Please wait for the update of the schedule. Thank you.


mga bossing 5days lang ba training? sa laptop servicing??


SAlamat po sa response nyo sa mga questions ko.


@ Arven Alarca

4 meetings po ang training for Saturday class or Sunday class at 8 meetings naman kung Mon. to Fri.


Ask ko lang po. May printer and Lcd Repair din po ba?


@ Jhonzen

Wala po kaming Printer and LCD Repair course.


WEN PO MAGKAKAROON NG SUN SKED NG LAPTOP REPAIR SA ESPANIA MANILA?


hi.. im willing to enroll for june class...
p[ls mail me the rate and sched.. from 6pm till 9pm if there is available..


@ dindo

Ok. We will email you for the details.


walang ibang sked for espana, manila??


@cedrick
Sir Please wait for the update of the schedule for España, Manila. We will post for the other sched as soon as possible.Thank you!


maa'm/sir,after the training po meron din po ba ito ojt like the pc assembly and troubleshooting you offer?i'm very interested po.thank's


@ dave

Sir wala pong OJT ang Laptop course.


hi, good afternoon.
nagbibigay po ba kayo ng OJT, pag natapos ang training ng laptop. and kailan po ang next enrol...pag hindi po naka pag enrol ngayon june. thanks sa reply


@ jheng

Wala po kaming OJT for this course. It's only for PC Troubleshooting. The next schedule after June is on July. Thanks.


Interesado akong mag-enrol sa course na ito, but I have one question: Coverred ba ng training na ito ang repair up to board level?


@ Gil

Yes, covered ng training ang pagrerepair up to board level.


please share with us your hand outs of your course so that we can used it in my instruction o my student in icf/chs. God bless.


bakit walang OJT ang loptap repair eh!yun pa naman ang pinaka importante?

HEF584


Hi !Good day ask ko lang po kung magstart na ang class sa makati for laptop repair,pls reply asap,thanks!


@ abet

Sir reschedule po ang class for Laptop due to lack of participants. Gawa po kayo ng resrvation nyo para mainform po namin kayo.Thanks.


wala bang Sked ng 9-3pm sa Sat?.. un lang kc available ko eh.


@Carlo

at the moment wala pa pong sched for 9-3pm sat


kailan ang end ng enrolment? pls rply, para makapag enrol din ako dis july kung meron


Jayr

On or before the training pwede po magenroll. Pareserve na rin po kayo online kung wala pa po kayong reservation. Thank you.


Do you have training center here in Davao?
I am interested.


Mga sir, pagkatapos po b nito pwede ng mag take ng hardware servicing the TESDA?


Mga sir, pagkatapos po b nito pwede ng mag take ng hardware servicing sa TESDA? ung Exam po..


@ Albert

Hi. Unfortunately we don't have branch in Davao.


@ Jorge

Sir please take PC ASSEMBLY, Hardware and Software Troubleshooting/Repair and Data Recovery (KB0101) and PC LAN/WAN SETUP, Cabling, Wireless LAN Setup, TCP/IP and Windows 2003 Server Admin (KB0103) then take the Assessment exam in TESDA.


Hi CNCTC team,
Required ba tlaga sa course na to na dpat may experienced na sa PC assembly,hardware,etc.


sa saturday na lang ako magbabayad nakapagpareserve na ako


@ Sophie

Basta may knowledge po kayo sa PC Troubleshooting pde na po yun.


@ joseph24

Sir reschedule po ang class ng Laptop Servicing sa July 09, 2011. Inform na lang po namin kayo kung kelan ang confirm schedule.Thanks.


good day CNCTC Admin

ilan po ang minimum enrolled students bago matuloy ang isang training period? thanks


@ b0b0t

Minimum of 3 participants po ang kelangan to start the training.


up to what time kau open bukas.


@joseph24

Up to 5pm po kame open bukas


sir im interested to attend the laptop training.

pwede po ako sa july 9.

i know how to repair a PC. i have a computer shop and i would like to add laptop repair as one of my services offered.

thanks


@ Ronaldo Liwanag

Yes pde po Sir please see this link for reservation http://www.cnctc.com.ph/res...

Thank you.


good pm cnctc. saan po kayo banda sa buendia? kung manggagaling po ako ng cubao ano po sasakyan ko papunta jan? mag-eenrol sana ako. salamat.


@ allan

Gud Day! Kung galing po kayo ng Cubao may mga bus po na LRT Buendia/Leveriza. Bababa lang po kayo dito sa Marconi St. before ng maliit na tulay.


matutuloy ba this coming saturday yung training dyan sa espana


ask ko lang po kung saan kayo sa buendia... dito lang ako sa libertad pasay... gusto ko sana mag inroll... pwedi pa po bang mag inroll ngayon? atsaka ano po ang tel# sa buedia branch?
maraming salamat po.


@ vic

Located po kami sa Rm. 208 2nd flr. # 7 UPY Bldg. Sen. Gil Puyat Ave. Cr. Marconi St. Palanan, from LRT Gil Puyat Station walking distance na lang po going to Makati Ave. Give us a call at 889-6042/43. Thanks.


hi kasama na ba dito board level repair tnx


@ matthew

Yes, kasama po ang board level repair.


Is it possible for a distance study?


I would like to enroll through distance study since I am a government employee in the province 12 hours ride to manila. Is this possible?


@ efren

I'm sorry but we don't have online training so it's not possible for you to enroll through a distance study.


sir, pnu makakarating branch ng espanya kung mangagagaling po ako ng ferview.?


@milo

One ride ka lng sir sakay ka ng bus pappuntang Quiapo tapos baba ka na sa Dona Amparo bldg. beside McDonald Espana


saan po b s makati yan sir


sir may NC II n ako ng hardware servicing kaso s desktop pwede n po b ako kumuha nyan


@ ernie

We're located at Rm 208 UPY Bldg., Gil Puyat Ave. (formerly Buendia Ave) corner Marconi St.Yes, pde nyo na pong kunin ang course na ito.


sir balak ko po sana mag training ng laptop repair, grad po ako ng comsci and im currently work sa comp tech, like ko sana matutunan ang laptop repair, pede po ba ako mag take nyan? saka may certificate din po ba ako makukuha incase na matapos ko ang training?


@mel,

Yes pwde nyo po itake ung training na to then may makukuha kyong training certificate after the course.


sir kailan ung enrollment for september?

and how may days ang traning?


@ Arvn Alarca

The enrollment is open. 4 consecutive days po ang training.


sa espanya on going ang enrollment sir?
halimbawa nagenroll ako ngayun start na ko bukas??


@ Arven Alarca

Yes Sir ongoing po ang enrollment. Every Saturday po ang schedule sa España Manila. at September 03, 2011 po ang next schedule.


ah ok, last question?

sir saan ako sasakay/bababa d2 ko galing sa quezon ave. (sa may ombudsman agham) paupnta jan ??


@ Arven Alarca

Sir sakay po kayo ng jeep bound to Quiapo along España lang po kami after UST two blocks away before po kami ng Mc Donalds. Ito po ang complete address Rm 210 Dona Amparo Bldg., Espana Blvd. corner G. Tolentino St. Sampaloc Manila.


SIR, PWEDE PO MALAMAN SAAN EXACT LOCATION NG INYONG SCHOOL FOR LAPTOP REPAIR. ANG ARAW NA AVAILABLE PO SA AKIN AY SAT. AND SUN.


@ Dens
Our Manila office located at Rm. 210 2nd flr. Doña Amparo Bldg. Cr. G. Tolentino St. Sampaloc Manila.and Our branch in Buendia Makati office located @ Rm 208 2nd flr. UPY Bldg. Sen. Gil Puyat ave. corner Marconi st., Palanan, Makati City.
Our available schedule is every Saturday in manila and every sunday in makati branch.


sir '
ask ko lang kung sakali mag enroll ako dis week posible ba na matuloy na ung sched sa spana branch? nakareserve po ako sa makati sunday schedule, eh pag open ko po uli sa site nyo na move pala ng 1 week ung shed,willing po ako mag transfer sa spana & mag enroll w/in the week kung sure na mag start na ung colass sa sat


@ Jun Aplaon

Possible na pong matuloy ung saturday schedule sa espana, manila. Inform nlang po namin kayo kung tuloy na po ang class.


meron ba kayong fast track, weekdays? or saturday and sunday para mabilis matapos?


@ Jing

Wla po. It's either Saturday or Sunday lang ang available schedule namin.


What are the requirements need to submit for me to enroll to this course? Do I need to submit brygy. clearance, TOR, or Diploma???


@ Alvin
No requirements is needed upon admission or enrollment. Just bring a pen and notebook. Thank You!


hello,after the training will you be able to provide us employer to apply for?sincerely for your response.....


@ Mark Gil

You can send your resume @ jobs.cnctc.com.ph Thank you!


Mam/Sir,tuturuan din po ba kami na mag solder ng IC o integrated circuits ng motherboard,chip level repair of board?marami pong salamat sa response....


Hello mark gil,

yes tuturuan po kayo up to chip level repair of board


ngstart na po ba yung class nyo interested po kce ako kaso gusto ko sana weekdays para madali matapos meron po ba available po nun... from province pa kce ako next week pa po ang dating ko ng manila pede po ba kaya ako makaabot??


@ sarah

Every Saturday and every Sunday po ang available na schedule po namin ngayon. Still open for enrollment. Minimum of 3 participants to start the training. Thanks.


hello,
interesado din ako mag-enrol ng laptop repair and pc repair sa buendia branch. kaso ngayon ko lang nakita ang website na ito, hindi ako available sa start of classes this weekend. may ibang weekend or after work training schedules pa ba kayo? Or may training din ba ng november? Ano pala requirements ng enrolment? appreciate response. thanks


@ karen

Yes magkakaroon po kami ng next upcoming schedule. No requirements is needed. Please keep visiting on our website. Thank you.


madam,confirmed nyo na po aq sa laptop repair na nk schedule this sunday oct.23 po.


@ Angel B.Sumo-ok

Yes Sir start na po sa Sunday ang Laptop Repair at 3-9pm. Thanks.


sir.. how many months/ years po yan matatapos?


@ Kevin John I. Cacal

24 hours po ang duration ng training. Every Saturday or Sunday ang available schedule good for 4 consecutive weeks.


Sir gusto ko sana yung chip level board repair pag repair ng mga electronics components at IC tuturuan po b kami, tahanks


kailan po mag start ang laptop servicing, assembly hardware troubleshoting at saan po ang venue,,,,,, tnks


@ Nilo S. Jumarito

Ang next schedule po nmin is on november 27, 2011. available @ buendia branch.
Thank you.


@ Jerwin

Yes sir, tinuturo po yung pag-repair ng mga chips sa board at IC. Thank You.


Good day!
I am already familiar with PC Assembly, Servicing etc. but haven't been certified yet, pwede na po ba ako makapag-enroll sa laptop servicing?


@ eathan

Good Day too. Yes pwede na po kayong mag enroll sa Laptop Servicing course.


wla bang discount??


@ Cedrick

Grab a coupon code to get training fee discounts http://www.cnctc.com.ph/blo...

Thank you.


tinuturo po din ba ang soldering and video chips and other motherboard level repair?

salamat po,
ad


@ Ads

Yes po tinuturo po ung pano magsolder, sa mga video chips at motherboard level repair.


pwede ba kunin ito ng di kunin yon pre requisite. im B. S.Computer science grad. work as pc technician for 8 years


@ Arnold

Yes pwede pong hindi nyo na kunin ang pre requisite course. Thanks.


me open po ba kaung laptop servicing ngaun?


@ junior camama

Yes meron po kaming open schedule sa España Manila every Saturday and Sunday in Buendia Makati.


anong time po ang schedule nyo kc sa cavite pa po ako nakatira


Consider of how many days po ang laptop servicing?


@ junior camama

Schedule for the class po December 3 to January 7 from 9am to 3pm at España,Manila and November 27 to December 18 naman po sa Buendia,Makati from 3pm to 9pm schedule, Good for 4 consecutives meeting. Thank you!


wla sa espana nito??


@ Cedrick

Meron po pero sa January 14, 2012 na po yung next schedule namin. Thank you.


meron po bang training na ganito sa baguio??? salamat po


@ manuel

Unfortunately wala po sir, only here in buendia makati and espana manila only. Thank You.


Ask LAPTOP Servicing, Assembly, Hardware Troubleshooting may cebu branch ba kayo...tnz


@ 2lits

Unfortunately wala po kaming branch sa cebu. where located only at espana manila and buendia makati. Thank you


mam ask ko lang po kung may nakaenroll na po ba sa schedule for sunday (january 15) buendia branch thanks!


@ noel

Sa ngayon sir wala pa pong nakaenroll pero may lima na pong nkareserve. Thank You.


ma'am ask ko lang kung ano requirements para maka-enroll kailangan ba related ka sa ganitong bagay?tapos pano kung experience nya lang ay desktop formatting pati pc assemble pati basic troubleshooting..


WHAT ARE THE REQUIREMENTS FOR ENROLLMENT... AND DO YOU HAVE EVENING SCHEDULE? TY


@ joey paradiang

Wala naman pong requirements upon enrollment basta po intresado kayong matuto. Thank you


@ LEIZEL

No other requirements upon enrollment just the payment. we have a schedule from 3pm to 9pm only. Thank you.


AS KO LANG PO MERON PO B KAUNG CONTACT NO. KC PO MEDYO MADALANG PO ME MKAPAGBUKAS NG NET GAWA WORK KO.KNG MAARI LANG PO.MAKUHA CONTACT NO. NIO.. O KAYA EMFORM NIO KO


@ eduard calimlim

This is our Contact number 736-5196 in manila and 8896-043 for buendia makati. thank you


mam kung matuloy na magstart yun class sa sunday sa makati puwede ba magenroll ng sunday mismo? thanks!


@ noel

Yes pwede po kayong mag enroll on Sunday kung matutuloy po ang training. Pareserved po kayo online para mainform po namin kayo. Thanks.


MERON PO KAU CP NO. KC MEDIO MALAYO PO ME SA BAYAN GAWA PO WORK KO.SAKA PWD PO MAKAPAG TAKE NG LOPTOP REPAIR NG ND KUMUHA NG PC TROUBLE SHOOT PERO KC MY KNOWLEGDE PO ME SA DESHTOP REPAIR. KNG PWD BKA MAKA SABAY PO SA NG ENROLL N 2 NW


@ eduard calillim

Yes sir pwede po kayo magtake ng laptop repair kung may knowledge na po kayo sa PC repair. pwede po kayong magtxt or tumawag sa number na ito 09104548471 para sa iba pang katanungan. Thank you


may certification ba na makukuha pag nagaral ka poh ng couse na ito???
na galing sa tesda???


@ eric

Certificate of completion po ang matatanggap nyo after finishing this course. Magtatake po kayo ng Assessment Exam ng TESDA to get TESDA CHS NCII certificate.


meron na po ba kayong sched for 3rd week of march to april? Thanks..


@ Bambi Olermo

Yes magkakaroon kami ng schedule for third week of march to april. please wait for the update. Thank you


hala? bakit po tumaas yung training fee nyo po ma'am/sir?


@ arvin

Yes po nagtaas na kmi ng price pero may free coffee.Thank you


4days training pa din po? o 5days every saturday?


@ arvin
Good for 4 consecutive meetings every saturday


may bckground na po ako sa pc desktop repair ..gusto ko po mag enroll sa course n yan laptop repair at assembly kasama n po b pti ung mga problem sa board level.. at sunday lng ako available kc may work po ako as a computer technician sa isang i.t shop ... pa post po sana ung sched para sa march

tnx po


@ rhicky

Yes, kasama po sa ituturo ang board level. Please keep posted for the upcoming schedule on March. Thanks.


hello sir interesado po ako sa pc\lan wan setup po kasama po ba ung parang internet setup po matututunan po din ba namin yun?


sir jay ulit .. .kasama na din po ba ung sa router at saka yung remote desktop?

tnx po


gud pm po interest me sa laptop repair sa course po na to,my hardware repair na tinuturo.i mean sa motherboard.mga i.c,board related,ba o assemble at dissasemble lang ang lesson,please ym me regarding sa laptop course,habol ko kc hardware sa motherboard." antonoirreyesjr[at]yahoo[dot]com " tia


@ antonio reyes

Yes po covered po nia lahat yung mother board ng laptop sa mga topics na tinuturo sa laptop repair. Thank you


sir kelan po mgsisimula ang training for the month of march.exact date po.


@ Junior Camama
Meron po tayong schedule March 24 to April 14 at España,Manila, March 11-April 1 naman po sa may Buendia,Makati.


bakit po dalawang ang branch lang kyo?di po matagal na kayo sa business na yan?ask ko narin po bakit po lagi kayo naghihire ng mga technical staff or structure nyo ala po ba kayo permanent na instructor or tehnical staff na emplyado nyo mismo?nagtatanung lang po..


bakit po dalawa Lang branch nyo?di po matagal na kayo sa business na yan?ask ko narin po bakit po lagi kayo naghihire ng mga technical staff or instructor nyo ala po ba kayo permanent na instructor or tehnical staff na emplyado nyo mismo?nagtatanung lang po..


KELAN PO ULIT OPEN SCHEDULE NEXT BATcH?


@ arvin

Ang next schedule po namin ay sa march 24/9-3pm sa Espana Manila at sa April 01/3-9 sa Buendia Makati open for enrollment. Thank you


tuloy ba ung sched ng mar. 19? nagpareserved po ako but since was so busy..di ko naupdate ang application ko..


@ judisalyn

Wala po kaming schedule ng march 19. march 24/9-3pm sa espana manila and april 01/3-9pm sa buendia makati yan lang po yung mga available schedule namin. Thank you


I'm a technician by profession, I would like to ask "Is there a chip level or laptop board repair training included on the course outlined"? I'm interested if it is included and happy to make a reservation if my question is being answered..Thank you


Sir/Ma'am wala po ba sa espanya branch? mag pa reserve sana ako eh...
mas malapit kasi saken yung Espanya... salamat..


@ Ruel Zarzua

Yes, kasama po sa training ang chip level or laptop board repair. Thank you.


@ arvin

Yes meron po kaming open schedule sa España Manila April 21. Gawa na po kayo ng Online reservation please see this link http://www.cnctc.com.ph/res...

Thank you.


ILANG DAYS poh YUNG training????


meron PO BA kayung form NA pwedeng IPRINT :)
enrollment form
chka tsaka PO SANA if posible din POH NA MAIPRINT din po yung mga modules and kung anu poh yung nakapaluod dun sa module balak q poh kasi KUNIn yung PC assembly HARDWare,software troubleshooting with repair and data recovery chka ito pong course na ito loptop servicing,assembly hardware troubleshooting with repair SANA po mabigyan Nyo ko IPAPAKITA ko poh kasi sa bosz q PRA maapprove YUNG 15DAYS NA EXTRA Holidays ko poh and BAKA mairefund q din sa bosz q YUNG IPANGTUTUITION Q HEHEHEHE sana POH meron gustu q POkasi tlga PUMASOK for extra knowledge thankyou po IN ADVANCE


6ooo whole payment napo ba ito?within the whole training?


@ Genezon Saladino

Yes P6,000 po ang tuition fee for the whole session na po.


hindi po ba kasama ang course yung motherboard repair or chips repair?basic lang po ba yan?it looks like a basic maintenance for laptop owners lang po ang scope ng course e..


baka naman po kwentohan lang yan sinasabi nyo na kasama ang motherboard chips repair?pahapyaw lang..i'm expecting na ituturo on how to troubleshoot and locate defective parts setion by section and how to remove defective and replace smd components on laptop motherboard and hopefully most of all explain the operation of laptop and how the circuit work..hoping a reply here...


May tesda exam din ba toh??? Anu passing percentage nyo dito sa particular training course nato???


@ jojo

Yes kasama po sa topics ang motherboard and chip repair.


@ boyhasler

Sir tinuturo po lahat yan, level by level kung pano po magrepair ng motherboard chips repair. Thanks.


@ Cedrick

Sir wala pong particular exam for Laptop pero pwede kang magtake ng exam ng CHS NCII gamit nga lang ay desktop. Thanks.


ask ko lang po kng complete as in comprehensive at completo ba talaga ang course like reading laptop block diagram at schematics(circuits)diagram?kasi yun po talga dapat ang importante maituro po sana para competent po students after the finishing the course..


Good day!

Sir/Madam, nakapag pareserved nko s course n ito s inyong Buendia branch. Tanong ko lng po kung sure n ang schedule 05-27-2012 date at ilan po ang dapat enrollees para siguradong matuloy? Thanks,


@ RJD

Still open for enrollment. Minimum of 3 participants po ang kailangan natin to start the training on May 27. Wait nyo na lang po advise namin. Thanks.


la po ba kaung branch d2 s region 1???? laptop servicing???


@ John

Unfortunately, wala po we're located only at Espana Manila and Buendia Makati. Thank you


bakit po hindi kasama sa course outline yung how to analyse and read laptop schematic diagram especially power supply section?like powering up the laptop using power button and how the laptop start?


meron po b kayong branches here in olongapo city?


@ sonnyboy natal

Unfortunately, wala po kaming branch sa Olongapo City. we're located only here at Espana Manila and Buendia Makati. Thank You


EVERYDAY po ba YUNg TRAINIng???????


@ noel

Hindi po, every Saturday and Sunday lang po ang available schedule namin. Thank you


kailan pa poh ang nxt opening nyo sa cures na laptop repair para makapag pa inrol din ako...


@ arnel

Our next schedule is on June 30, 2012. Open for enrollment. Thank you


Hi ask ko kung ung address sa buendia?


ask ko lang ung exact location sa buendia, ano po b ung complete address sa buendia?


@ Sean Alvarez

Our branch office is located @ Rm 208 UPY Bldg., Gil Puyat Ave. (formerly Buendia Ave) corner Marconi St. Palanan Makati City. Thank You


ask ko lang po kng magagamit ko po ba yan sa abroad kng sakali magapply ako?anu po ba possible na position ang maari kng aplyan sa abroad?quarantteed po ba na matanggap ako?


@ Jason Enares

Yes, pwde po kayo magaplply sa ibang bansa as Laptop Technician. Thank You


sa entry requirements... kailangan ba sa center nyo maacquired yung pc assembly etc... eh kung may experince nmn from work or my NC-II na
pede na ba magskip? and straight na for laptop.. servicing


@ joem

Yes, pwede nyo na po kunin yung laptop repair kung may knowledge na po kayo sa Pc assembly. Thank You


sir pwede koba isabay to sa computer hardware servicing with exam?
BS IT 4th yr po me kaka stop lang


@ celski

Yes, pwede nyo pong kunin ang course na ito.


sir meron po ba kau training for repair lcd and led monitor?


anu po exact address nyo sa espana tnx


@ randy

Wala po kaming course for LCD repair and LED monitor. Thank You


@ eunel

Our main office is located @ Rm 210 Dona Amparo Bldg., Espana Blvd. corner G. Tolentino St. Sampaloc Manila. Thank You


gud day sir, im a graduate of computer science and i would like to take laptop repair, do i have to take the pc assembly first before i can proceed to this course?


@ Meldrin Uy

You can proceed to this course if you have a basic knowledge regarding PC assembly. Thank you


Ask ko lang Kung may sked na for September so I can plan ahead! Tapos pwedeng credit card ba as payment mode? Waiting for a reply! Thanks.


@ Cris Macaranas

Yes, we will be having a schedule for the month of September. opo pwede rin po ang credit card through paypal.Thank You


basic to advance ba ang turo dito?kasama ba ang heating ng chips at reballing?ituturo din ba kng panu mgreplace ng smd device at kng saan puede bumili kng sakali kailangan?


@ eddie layonosa

Yes, basic to advance po ang tinituro dito, kasama din po ang heating ng chips at tinuturo din po sa inyo kung saan kayo pwede bumili. Thank You


wala bang weekdays sa laptop servicing?


@ juvenal manatad

unfortunately wala pa po kming weekdays schedule but we will try to open soon. Thank you


ituturo pu b d2 ung pag trace ng burnt ic., s mother boards?.,


@ariel

hindi po..


Can I take this course without taking the PC assembly stuff?


@ Ardal

Yes, you can take it Sir. Thank you


...po.. magandang hapon sa inyu.. ako po ay nagandahan sa inyung TRAINING CENTER nais ko pong mag aral pero malayu dyan sa maynila... nandito lang kami sa cebu... sayang talaga... meron po bang ganyan dito sa cebu???


@ louie abunda

Goodmorning Sir, We do not have any branch in Cebu, Our main office located at España, Manila and our branch located at Buendia, Makati.Thank you


SIR ILANG DAYS PO YUNG TRAINING NYO?


@ bryan canlas

4 meetings po ang training for Laptop. Thanks.


what do you mean na pde magtake ng exam ung mga nag laptop training ng CHS NCII gamit ay desktop?

may cerification ba lahat ng training niyo ng TESDA?


@ Camille

Yes, meron po kayong matatanggap na certificate of completion after ng training. Thank You


can i take this "LAPTOP Servicing, Assembly, Hardware Troubleshooting and Repair - KB0102" without taking up PC assembly?

alam ko na po lahat ng nsa Pc assembly sir.. plz response on this .. thanks in advance


@Ian

Yes po pwde nyo na itake ung Laptop Servicing course.


ok lng po b mgtake ng LAPTOP SERVICING kht po hndi nkpg 72 units?


wala bang cebu area dito??


sir tanung ko lang po bakit ang tagal nung pipirma ng certificate nmin mag iisang buan na po wala pa din sa laptop repair assembly po to naka dalwang balik na ako sabi txt na lang hang gang ngayun po wala pa txt sana po mapirmahan na paramakuha ko na


@ james

Unfortunately we're located only at españa manila and buenda makati. Thank you


sana maibigay nyo agad ung certificate CNCTC ksi importante po un,,kya nga gus2 ko mag-aral dyn sa inyo dhil my certificate.bkt nagkkaproblema ung isang students ninyo isang buwan na wla a rin..wag nmn sana mangyari sa akin yan..sana o gawan nyo ng action yan..tnx po.


@ bryan canlas

Available na po yung Certificate niyo. pwede niyo na po kunin anytime. Thank You


salamat po ma'm nakuha ko na Certificate ko


@ bryan canlas

Okay Sir your welcome :)


5 DAYS LANG PO BA ANG TRAINING SA BAWAT COURSE NA KUKUHANIN?


@ ABULHAIR MANGO

Iba-iba po ang duration ng class dipende po sa course na gusto ninyong kunin.Thank you!


ilang days po ang training?


@ raffy

The course duration for Laptop Repair is 24 hours good for 4 meetings. Thanks.


Hi CNCTC, do you already have any schedule/s for the month of April? Thank you.


@ Neiro

Yes, we have a schedule on April 07, to April 28, 2013. Please make your online reservation @ http://www.cnctc.edu.ph/res... Thank You


ratio po ba ng training is 1person 1pc/unit ?


@ carlo

Yes, the ration is 1:1. Thanks.


Sir pwede po b ako mag take ng laptop tech. kahit wala ako certification and ojt for desktop. alam ko naman po mag pc assembly eh.


@ Benchkadafi

Yes pwede na po ninyong kunin ang Laptop servicing course, please make a reservation with this link http://www.cnctc.edu.ph/res...


ma'm rose kaylan po start ng LAPTOP Servicing, Assembly, Hardware Troubleshooting and Repair
balak ko po sana mag set in ulit

paki txt po kung kaylan at araw eto po no. ko 09192004674

bryan canlas


@ bryan canlas

Okay, inform nalang po namin kayo kung may mag-start po na class dito sa buendia. Thanks


Hi! Nag start na po ba young April 27 na class sa espana branch ng laptop repair? Sit in sana ako ng 3rd & 4th meeting, Di ko natapos Kasi last time, to earn my certificate! -- Cris macaranas


@ Cris macaranas

Yes, po nag-start nung April 27 yung training. punta nalang po kayo dito sa Saturday. Thank you.


Good Day po! Mam wala po ba kayong laptop servicing na pang saturday na schedule sa makati ngayong june. every saturday lang po kc ang off ko. sayang sunday po kc nakita ko na schedule nyo sa makati. kailan po kaya magkaroon mam ng schedule na pang saturday.


@ Andy Villalba

Okay, we will try to open Saturday schedule for the month of june. please keep posted for the update. thank you


Thank you po Mam sana magkaroon ng schedule ngayong june aantayin ko po yan..


@ Andy Villalba

Yes, Sir please keep posted. Magkakaroon din po tayo ng schedule for the month of June. Thanks.


Sana po 9 to 3 po yong schedule sa june na pang saturday thanks po.


@ Andy Villalba

Yes, po 9-3pm po yung schedule namin sa June. Thank You


thank you po tingnan ko nalang po kung mag update na po kyo ng schedule for june...para makapag pareserve na po ako..


@ Andy Villalba

Okay po.Thanks


hi! qualified po b ako mg enroll sa laptop technician? messenger/computer technician job ko d2 sa company na pnagttrabahuan ko, ska nka 2 years ako sa computer science course, more than 72 units.


@ Carlo

Yes po your qualified pwede po ninyong kunin ang Laptop servicing course.


meron po ba board leveling d2?


Good evening po Mam/Sir yong sunday nyo pwede po bang gawing 9-3pm hehehe para makasama ako dyan tagal kasi pang saturday nyo baka magastos ko kc yong pambayad na nakabudget na dyan...


@ Andy Villalba

okay, try po namin mag-open ng 9-3pm for Sunday schedule. please keep posted. Thanks


Thank you po Mam/Sir..


@ Andy Villalba

Your Welcome!


Tanong ko lang po kung ilang meetings ang sa Laptop Services sa Espana, Manila. :) Salamat po.


@ Justin Roy

Good for Four meetings only. Thanks


where is the exact location of the training center in makati?


@ Ariel sanorjo

Our branch office is located @
Rm 208 UPY Bldg., Gil Puyat Ave. (formerly Buendia Ave) corner Marconi St. Palanan Makati City. Thank You


sir/ma'am can you assist as in seeking the on the job training after we graduated on that course?


@ Alvin Tuyor

Yes we will assist you and help you with in seeking the On-Job training for Laptop Servicing.Thank you!


hi good evening..
ask ko lang po kung qualified ako para sa laptop servicing.. kasi computer technology po ung course ko grad. po ng two years pero hindi pa ko nag eexam ng nc2.. tnx


@ glenn

Yes, qualified po kayo to take the LAPTOP Servicing training. Thanks.


meron po b board level dyan s laptop training?i mean pag board n po un sira ituturo din po b pano gawin?


@ nel

yes itinuturo po ung sa boad level ng laptop at kung pano irepair.


sir ano po ba req. and qualification sa laptop servicing?pero may short course po ako ng comp and hardware servicing.pwede po ako dun sa course nyo na laptop servicing?


@ juanito vergara

ENTRY REQUIREMENTS:

Students who intend to get this training should have experience in the following:

Have taken the PC ASSEMBLY, HARDWARE & SOFTWARE TROUBLESHOOTING/REPAIR & DATA RECOVERY With OJT course.

Thank you.


hi po good morning, napakaganda po ng offer nio.. ano ano po ba ang kailangan para makapasok? or requirements na dapat isubmit thank you po.


@ Chel

Wala naman pong ibang requirements except po yung payment. you can make your online reservation first @ http://www.cnctc.edu.ph/res... Thank You


qualified po ba ako nka 3rd yr ako sa electronics, at the same time ilang sem sa computer network & hardware servicing? now freelance computer technician po nag rerepair ng desktop, salamat


sir tumatawag po ako sa 889-6043/6042 wala po sumasagot. ask ko lang po 4days duration or pag pasok lang po tlga ung 6k ? then after nun matututunan na ung lahat ng nasa covered topics? i mean in just short period of time, expertise po ang benefits? thank you po


@ ryan timonera

Yes, you're qualified to take this training. Thanks.


@ Chel

Please try your call again. Yes, 4 days po ang pasok for P6,000 na course fee. Lahat ng topics ay macocovered in 24 hrs and more on hands on ang training. Thank you.


sir/ma'am ok lng ba na itong course not only for boys, pwede din mag take ang girls..ako kze guzto ko matutunan un mga trouble shoot..


@ donna

Yes, pwede mong itake ang training na ito. Thanks.


sir,

kahit hndi wla experience, kze ako graduate ako ng comsci,more on programming,gusto ko hnd lng sa software kundi sa hardware din..


sir/mam,

kahit wla experience pwede mag take ng training para dito..thank you so much..


anong best time po ba pwede tumawag? kase po almost 40min. po aq sa payphone wala po tlga sumasagot sa 880-6043 / 889-6042 im interested to start sir maraming salamat po


sir kahit po CP no. nalang, makuha ko lang po ung info na kailangan ko malaman, tnx po wait ko asap.


@ donna

Yes, kahit wala po kayong experience pwede nyo pong itake ang training na'to. Thanks.


@ Chel

Our office hour is from Mondays to Fridays 9am to 5pm, Saturday and Sunday 9am to 3pm. Give us a call @ 889-6042, 889-6043, 239-5577, 09334620034. Thank you.


wala po ako sa kht anung requirments nio,as in zero knowledge po ako....pwd po b akong mgtraining?


@ Randy

Pwede po kayong magtraining sa course na ito ngunit kaylangan po muna ninyong makuha ang pre-requisite ng course na PC ASSEMBLY, HARDWARE & SOFTWARE TROUBLESHOOTING/REPAIR & DATA RECOVERY


wala po ba discount kung kukunin ko yung pre-requisite na course then laptop servicing?


@ Lean

Sorry po wla pong discount.


hi po.. interesado po ako.. anu po contact no. ng Espana, Manila office nyo.. para po makapag inquire ako.. thank you..


my kasama na po ito nc11 exam? tnx


@ jay

Hello, you can call us @ (02)736-2032, (02)736-5196. Thank you.


@ sapnot

Sir pang desktop troubleshooting and pc networking po ang TESDA CHS NCII Exam. Thanks.


busy po lagi phone nyo ndi ko makontak.. baka po my cp number kayo.. o kaya anu po pinaka malapit na landmark papuntang office nyo sa espana?


@ jay

Ang landmark po is along España after UST going to quiapo bago mag MCDO. Kahilera namin ang UST.


Dear CNTC,
I would like to take three courses from your training center to wit: PC ASSEMBLY, Hardware and Software Troubleshooting with Data Recovery, Laptop Servicing, Assembly, Hardware Troubleshooting and Repair and finally, PC LAN/WAN SETUP, TCP/IP and Windows 2003 Server Active Directory Administration. I am confident that based on what you have published in your course description, the PC ASSEMBLY SIDE AND THE NETWORKING SIDE is a comprehensive course that can cater a lot of know how on the trainee. But for the laptop servicing side, I doubt that the trainee can be an expert laptop technician because of the brevity of the training hours. So I have a question for you, Is there an ojt for the laptop repair and assemble course after completing it in your training center? I will appreciate for your favorable reply


@ Adolfo

Yes we also offering OJT after the training for Laptop Repair.Thank you!


hi ask ko lang kung tig iilan na defective or working laptop bawat student


@ Noel

One is to one po ang gagamitin ninyong gamit sa loob ng klase. Thank you!


Interesado po ako sa 3 courses nyo >> laptop servicing-
hardware servicing w/ nc2-
Windows 2003 Server Active Directory Infrastructure Administration

alin po kaya mas magandang unahin? thanks..


@ sapnot

Take first the TESDA CHS NCII course then the next is Laptop Servicing. Thank you.


hi, just reserved a slot in Oct. 21,2013 espana branch. sana matuloy...


Matutuloy po ba ung laptop servicing dto sa buendia ngayong 18? or mamove po siya ng 25?


GOOD day poh ask ko lng kasi i dont have any certification or training on pc assembly but malawak n po experience ko sa pc/cpu hardware/software repair and im here in Saudi As a Com. tech and id like to ask kung pwede b ako mag avail ng course na LAPTOP SERVICING AGD? salamat poh


Hello. And Bye.

http://somepaydaylounz.com - mr fitz


nais ko sana magenroll dito, taga cebu po ako. Meron ba kayong training center dito sa cebu?


Hi! Pa reserve po ako sa June 8, 2014 - June 29, 2014 every Sun 3-9pm. Thanks


Hello, I reserved for Laptop Assembly and Troubleshooting Module on Sat 3-9 pm beginning 10 May in your Manila branch. But I think I should start with PC assembly first. I do not have an account with you, I merely reserved. Could someone please undo my reservation so I could make a new reservation for the PC Assembly module on Sat 9-3 pm starting 10 May? Many thanks

  
Live Chat Software

Job Openings

Scheds Updates

Stay Informed Subscribe

Name *

Email *